Code-3 Arch Beacon User Manual download pdf (Page 5)

Dimensions:

(Basic dimensions are as shown)

1. Remove beacon outer lens.

Note: Two hole patterns are provided for the user. The stan

dard 6 inch dia pattern and optional 5.7 inch

dia pattern. Only three #10 fasteners are

required to securely mount the beacon assembly.

2. Choose hole pattern (6" dia or 5.7" dia). Identify the 3 holes

chosen as indicated on the base's label and punch out with a sharp

object.

3. Use the beacon base to locate holes on mounting surface. Holes

should accomodate a #10 fastener. A hole should be provided for

wiring access at the center of the mounting area. The hole should

be grommeted and sealed with RTV around the wiring.

4. Align the gasket and and perimeter of the beacon base and

punch out the 3 chosen mounting holes with a sharp object. Place

gasket and beacon assembly on mounting surface being careful

to align the mounting holes. Care should be taken to not pinch the

wiring when placing the beacon assembly.

5. Install three #10 fasteners, at washers with neoprene backing,

and lock nuts (included) as shown to attach the assembly. Apply

RTV to the fastener holes during the installation.

6. Reinstall beacon outer lens.

Standard Mounting Procedure:

1 2 3 4 5 6 7 8 9 10 11 12

No comments

Code-3 Arch Beacon User Manual Page 5