Code-3 Arch Beacon User Manual

1Read all instructions and warnings before installing and using.INSTALLER: This manual must be delivered to the end user of this equipment.IMPORTANT:A

10Notes:

11Notes:

Revision 1, 08/12 - Instruction Book Part No. T51315©2012 Public Safety Equipment, Inc. Printed in USAPRODUCT RETURNSIf a product must be returned for

2Features and Specications:Operating Voltage: DC11V-16V, Reverse Polarity ProtectedOperating Current: Avg 3.75 amps, Max 7.5 ampsWeight: 4.5 lbFlash

3Flash Patterns (including for those with scene lights):PATTERN NO. PATTERNS SYNCHRONIZE1 NFPA Quad Phase 0 YES2 Cycle Flash 75fpm Phase 0 YES3 Quad 7

4Flash Patterns for ECE-65 compliant beacons:PATTERN NO. PATTERNS SYNCHRONIZE1 Single Flash 120fpm Simultaneous Only2 Double Flash 120fpm Simultaneous

5Dimensions: (Basic dimensions are as shown)1. Remove beacon outer lens.Note: Two hole patterns are provided for the user. The stan dard 6 inch dia

6Optional 1in NPTPipe Mount Assembly:1. Remove beacon outer lens.2. Choose the 6" dia hole pattern. Identify the 3 holes chosen as indicated on t

7Mounting Instructions for NFPA Compliance:When the beacon's lens is removed for installation, the warning signal producing optic-LED assemblies

8Wiring Instructions:The beacon is terminated with a 12" long 6-wire cable harness that may be connected as follows:COLOR FUNCTION CONNECT TORed

9Maintenance:The beacons are designed to be maintenance free. Refer to the guide below for help with troubleshooting. Should the unit be diagnosed as