Code-3 Arch Beacon User Manual download pdf (Page 9)

Maintenance:

The beacons are designed to be maintenance free. Refer to the guide below for help with troubleshooting.

Should the unit be diagnosed as malfunctioning, remove unit and replace with a new beacon.

TROUBLESHOOTING

Problem Probable Cause Remedy

Beacon does not activate a. No power to unit a. Check wire for loose connection

b. Power input wire reversed b. Reverse power wires

c. Damaged or shortaged cabling c. Check cables for damage

d. Defective beacon d. Replace beacon module

Beacon is constantly ON a. Control wire permanently

grounded or shorted to GND

a. Avoid permanent grounding of

control wire

LED beacon housings may become hot with extended use. Allow beacons to cool completely

before attempting to remove.

WARNING!

1 2 3 4 5 6 7 8 9 10 11 12

No comments

Code-3 Arch Beacon User Manual Page 9