
INSTALLATION& OPERATIONMANUALFLASH SERIESRead all instructions and warnings before installing and using.INSTALLER: This manual must be delivered t
2The use of this or any warning device does not insure that all drivers can or will observe orreact to an emergency warning signal. Never take the ri
3IntroductionThe Astro/Star/Nova "Flash" Series Strobe Beaconsrepresent the latest advances in state-of-the-art 360degree strobe warning tec
4Pipe MountingThe Strobe base will accept a standard 1" NPT pipe. Hand tighten the beacon base on the pipe threaduntil the pipe bottoms out insi
5WARNING!!Larger wires and tight connections will provide longer service life for components. For highcurrent wires it is highly recommended that ter
6TroubleshootingPROBLEM PROBABLE CAUSE REMEDYa.) Unit power leads hooked up backwards.b.) Output capacitor shorted.c.) Flashtube worn.d.) Flashtube po
7Full Size Mounting TemplateREPLACEMENT PARTS LISTPART NO. DESCRIPTIONT05606 XENON FLASH TUBET04537 ALUMINUM CIRCUIT CASET04538 DIE CAST BASET02239 LE
WARRANTYThis product was tested and found to be operational at the time of manufacture. Provided thisproduct is installed and operated in accordance w
Comments to this Manuals