Code-3 2100 User Manual

1INSTALLATION& OPERATIONMANUALLED X™ 2100LIGHTBARRead all instructions and warnings before installing and using.INSTALLER: This manual must be d

10WARNING!Lamps are extremely hot! Allow to cool completely before attempting to remove. Gloves andeye protection should be worn when handling halog

11FIGURE 10If attempting to clean the reflector, use only a mild glass cleaner and a very soft cloth. Do not attempt to use any wax typeproducts as t

123 467102111Note: All screws are part no. 1215 unless otherwise indicatedFIGURE 12LED X 2100 EXPLODED VIEW589TM12

13Parts List(Reference numbers identify items shown in Figures on previous pages)Ref No. Description Part No.#8 x .250" Sheet Metal Screw T05029#

14PROBLEMLED directional or360 module notoperating whenpowered.360 corner modulehas one head out.360 corner modulehas one head out.Dimming does noto

15Follow the guide below for information on repair and trouble shooting for the arrowstik option.ARROWSTIK® OPTIONTROUBLESHOOTING GUIDEPROBLEMArrowsti

16Revision 11, 01/2006 - Instruction Book Part No. T09453©2002-06 Code 3, Inc. Printed in USAWARRANTYCode 3®, Inc.'s emergency devices are tested

2IntroductionThe LED XTM 2100 Light Bar is a light bar that is approximately 2" high, yet delivers unobstructed 360° warning and more signalpower

3Unpacking & Pre-installationCarefully remove the light bar and place it on a flat surface, taking care not to scratch the lenses or damage the ca

4Mounting Bracket5/16-18 Carriage BoltCustomer Supplied BoltPlastic Shim (if needed)Rubber Foot5/16" NutFIGURE 3Bottom of LightbarFIGURE 2Vehicle

5FIGURE 4Once the light bar is level and centered, mark the holes through the mounting tabs and remove thelight bar from the vehicle. Make sure that

6This Product contains high intensity LED devices. To prevent eye damage, DO NOT stareinto light beam at close range.WARNING!!L.E.D. Fusing Considera

7 Code 3® OPTIX™ 360 DEGREE CORNER MODULESThe LED X™ 2100 Lightbar is equipped with new Code 3® OPTIX™ 360 degree corner LED modules that provide a

8 LED DIRECTIONAL MODULESIn addition to the 360 warning modules the lightbar may be equipped with a number of single head directional warning LEDmodul

9FIGURE 7LC-LED MODULESThe LC-LED modules are equipped with one steady burn and three flashing patterns. To select a different flash pattern, apply +