Code-3 Solex User Manual download pdf (Page 11)

SIRIS™ LIGHT HEAD

TROUBLESHOOTING

Troubleshooting

All SOLEX™ Light bars are thoroughly tested prior to shipment. However, should you encounter a problem during installation or during the life of the

product, follow the guide below for information on repair and troubleshooting. Additional information may be obtained from the factory technical help

line at 314-996-2800.

Note: LED light heads must be replaced as a module. There are no user serviceable parts. Warranty is void if

module is disassembled

PROBLEM QUESTIONS POSSIBLE CAUSE SOLUTION

SIRIS Front Module

not operating

Are all heads out

in front or in back,

and not just a

single module out?

Yes

a. Front and/or Rear Cut Function powered

a. Defective module

b. Cable/Connector unplugged

a. Remove power (turn off) Front and/or Rear Cut

a. Replace module

b. Check cable & connector

SIRIS Corner Module

has one head out. NA a. Defective module

b. Cable/Connector unplugged

a. Replace module

b. Check cable & connector

Cruise Lights do not

operate NA a. No power on Cruise wire

b. Another Central Controller Function is on

a. Connect Cruise wire to switch

b. Turn off other functions

Any disassembly of any of the SIRIS™ light heads will result in loss of warranty coverage on the

equipment.

WARNING!

Notes:

1 2 ... 6 7 8 9 10 11 12

No comments

Code-3 Solex User Manual Page 11