Code 3 SuperVisor Service Manual

INSTALLATION & OPERATION MANUALRead all instructions and warnings before installing and using. This manual must be delivered to the end user

10Parts ListReference Number Part Description Part Number Quantity

11Hardware/Parts-Cont. Items 17 Thru 21 Not Shown in Exploded ViewReference Number Part Description

12FIGURE 8FIGURE 9FIGURE 10Adjusting/Aiming the Take Down/Warning Lights-Cont.

13 For Problems with the Upper Gasket during installation!If you experience problems with the Upper Gasket during installation, follow the

14NOTES:

15NOTES:

16Revision 1, 12/12 - Instruction Book Part No. T15538 ©2012 Public Safety Equipment, Inc. Printed in USAWARRANTYCode 3, Inc.'s emergency device

2IntroductionThe SuperVisor U™ (hereafter calld "unit") is an interior lighting system that ts in the visor area near the top of the windsh

3 Installation & Mounting Instructions-Full SuperVisor U or Passenger Side Only SuperVisor UNote to the installer: The following steps for the

4Installation and Mounting Instructions: Cont. Step 4 Have an assistant hold either the Passenger or the Driver side of the the Unit up to the vehicle

5FIGURE 2 STANDARD ROUND OUTER MOUNTING BRACKETOVAL OUTER MOUNTING BRACKETRECTANGULAR OUTER MOUNTING BRACKETSUV (TAHOE) OUTER MOUNTING BRACKETSTANDARD

OUTER MOUNTING BRACKET ASSEMBLYSINNER MOUNTING BRACKET ASSEMBLYSMOUNTING HOLE LOCATION CHOICESMOUNTING HOLE LOCATION CHOICESUNDER SIDE VIEW OF UNIVERS

RECOMMEND 1/8" RADIUS 2XRECOMMEND 1/8" RADIUS 2XCUT OFF AS SHOWN FOR DRILLED AND FASTENED BRACKETSUSE HOLES AS A TEMPLATE TO DRILL MOUNTING

PASSENGER SIDEDRIVERSIDELT BLUEPURPLEWHITE RED THIS WIRE IS ALSO FOR TAKE DOWNS WHEN SO EQUIPPEDORANGEGREEN/W

LED Fusing ConsiderationsAlthough the average current draw per module is very low, due to the type of circuit used to power each module, the instanta