Code-3 SmartPro Configuration Interface User Manual download pdf (Page 2)

Programming a Lightbar

1. To program a lightbar, load a configuration into the handheld unit.

2. Next plug the programming cable into the lightbar.

3. Press the Write button for approx. 1 second.

4. The operation should take 4-5 seconds.

5. Once the unit power indicator has turned off it is safe to unplug the cable.

Reading a Lightbar

1. Plug the programming cable into the lightbar.

2. Press the Read button for approx. 1 second.

3. Once the unit power indicator has turned off, it is safe to unplug the cable.

1 2

No comments

Code-3 SmartPro Configuration Interface User Manual Page 2