Code-3 LIT3 Mounting Kit User Manual Page 1

INSTALLATION&OPERATIONMANUALRead all instructions and warnings before installing and using.This manual must be delivered to the end user of this e

10Larger wires and tight connections will provide longer service life for components. Forhigh current wires it is highly recommended that terminal bl

11TroubleshootingLED module housings may become hot with extendeduse. Allow modules to cool completely before attemptingto remove.WARNING!!TROUBLESHO

12Reference Number Part Description Part Number1 Mounting Foot n

13Notes

14Notes

15Notes

16WARRANTYCode 3, Inc.'s emergency devices are tested and found to be operational at the time ofmanufacture. Provided they are installed and ope

2Unpacking & Pre-installationCarefully remove the LIT3 Mounting Kit from the shipping carton, taking care not to scratch the lenses of the LED Lig

3FIGURE 1Installation InstructionsInstaller Note: If the LIT3 Mounting Kit being installed is a Lighted Version, proceed with the following steps! If

4Installation Instructions-Cont.Note: The following Steps 9 through 13 are the same for both Lighted Mounting Kits and Standard Kits (The Lighted Vers

5Installation Instructions-Cont.Note: If you are installing a Standard Version of the Mounting Kit, skip Steps 13 through 16 and proceed with Step 17&

6Special Instructions - Lightbar Internal WiringLIT3 mounting kit lightheads may be wired to operate in conjunction with lightheads mounted in the lig

7Step 19 Attach the Wedge Shaped Rubber Mounting Foot Pad by pushing the christmas tree shaped rib feature into the space between thetwo center ribs o

8FIGURE 38Installation Instructions-Cont.Step 24 After the Lightbar Cable has been routed as desired, position the Lightbar on the roof of the vehicle

9Installation Instructions-Permanent Mount.Step 1 Permanent Mount Determine the location for the lightbar on the vehicle and check that no equipment o