Code-3 MR6 User Manual download pdf

120523

To + VDC (fuse @ 3A):

To Chassis Ground:

For Synchronization:

Connect

YELLOW

wires of all heads together for synchronization

(All heads must be set at the same pattern)

For Simultaneous or Alternating Flash:

1. Apply +VDC to

RED

and

YELLOW

wires simultaneously to enter

Grouping mode; lighthead will display short (single or double) flashes:

˙Single flash = Group1 ˙Double flash = Group2

2. Remove YELLOW wire from +VDC and momentarily apply to +VDC

to change Groups:

˙Heads in the same Group flash together.

˙Group1 Heads alternate with Group2 Heads.

YELLOW

BLACK

RED

For Flash Pattern, momentarily

apply +VDC to YELLOW wire:

˙once for next pattern

˙quickly three times for reset

(see flash pattern chart)

Surface Mount

Single

(2Hz)

Double

(2Hz)

Triple

(2Hz)

Quad

(2Hz)

Random

Single (split)

Double (split)

Quad (split)

Quint (split)

Mega (split)

Ultra (split)

Single-Quad (split)

Single H/L (split)

Single (all)

Double (all)

Quad (all)

Quint (all)

Mega (all)

Ultra (all)

Single-Quad (all)

Single H/L (all)

Steady 2 (california)

Steady 4 (all)

Flash Patterns

1 2

Summary of Contents

Page 1 - Surface Mount

120523To + VDC (fuse @ 3A):To Chassis Ground:For Synchronization: Connect YELLOW wires of all heads together for synchronization (All heads must be

Page 2 - Bracket Mount

mounting surfacemounting screw120523Adhesive Mount1. Clean mounting surface.2. Use adhesive pads to secure lighthead.NOTE: Optimum adhesive strength i

Comments to this Manuals

No comments

Code-3 MR6 User Manual

Browse online or download User Manual for Lighting Code-3 MR6. Code 3 MR6 User Manual

Summary of Contents

Comments to this Manuals

Related products and manuals for Lighting Code-3 MR6